Drilling Chemicals

Alkalinite ve Sertlik Kontrol Katkıları
KOSTİK POTAŞ Potasyum Hidroksit Alkalinite Kontrolü CAUSTIC POTASH is high purity potassium hydroxide (KOH).
CAUSTIC POTASH contributes to inhibition of water sensitive shale formations.
CAUSTIC POTASH removes calcium and magnesium contaminants as hydroxides in water-base drilling fluids.
CAUSTIC POTASH activates and solubilizes the organic deflocculants such as lignite and lignosulfonate (KAR-CFL).
CAUSTIC POTASH controls the pH and alkalinity properties of water-base drilling fluids to treat carbon dioxide contamination.
CAUSTIC POTASH reduces corrosion rate by maintaining high pH.
KOSTİK SODA Sodyum Hidroksit Alkalinite Kontrolü CAUSTIC SODA is a high purity sodium hydroxide (NaOH).
CAUSTIC SODA is a cost effective chemical to remove magnesium as insoluble hydroxide from sea water when used as make-up water.
CAUSTIC SODA activates and solubilizes the organic dispersants such as lignite and lignosulfonate (KAR-CFL).
CAUSTIC SODA controls the pH and alkalinity properties of water-base drilling fluids to treat carbon dioxide contamination.
CAUSTIC SODA reduces corrosion rate by maintaining high pH.
SİTRİK ASİT Sitrik Asit Kalsiyum & pH Kontrolü CITRIC ACID (C6H8O7) is a weak organic acid.
CITRIC ACID reduces pH and removes soluble calcium ions by the reaction
ALÇI Kalsiyum Sülfat Kalsiyum Kaynağı LIME is a high-purity calcium hydroxide having the chemical formula Ca(OH)2.
LIME is a common and an inexpensive source of soluble calcium for lime-base drilling fluids.
LIME is very effective in removing bicarbonate and carbonate contaminations from water-base drilling fluids.
LIME increases viscosities and gel strength of  (spud mud) for better hole cleaning. This is particularly an important issue in top hole drilling.
LIME  activates fatty acid based primary emulsifiers in oil based drilling fluids by converting them to calcium soap emulsifier in situ.
LIME reduces corrosion rate by maintaining high pH.
KİREÇ Kalsiyum Hidroksit Kalsiyum Kaynağı & Alkalinite Kontrolü LIME is a high-purity calcium hydroxide having the chemical formula Ca(OH)2.
LIME is a common and an inexpensive source of soluble calcium for lime-base drilling fluids.
LIME is very effective in removing bicarbonate and carbonate contaminations from water-base drilling fluids.
LIME increases viscosities and gel strength of  (spud mud) for better hole cleaning. This is particularly an important issue in top hole drilling.
LIME  activates fatty acid based primary emulsifiers in oil based drilling fluids by converting them to calcium soap emulsifier in situ.
LIME reduces corrosion rate by maintaining high pH.
SODA KÜLÜ Sodyum Karbonat Kalsiyum Giderici SODA ASH is a high-purity sodium carbonate (Na2CO3).
SODA ASH is a cost effective product to precipitate soluble calcium ions as insoluble carbonates in water-base drilling fluids.
SODA ASH maximizes the performance of bentonite and polymeric additives such as KAR-PHPA RD and KAR-PHPA L.
SODYUM BİKARBONAT Sodyum Bikarbonat Kalsiyum Giderici SODIUM BICARBONATE (NaHCO3) is used primarily to treat cement contaminated water-base drilling fluids.
SODIUM BICARBONATE effectively reduces soluble calcium ions and pH in cement contaminated water- base drilling fluids.
SODIUM BICARBONATE is a cost effective chemical for control of cement contaminated drilling fluids.
Bakterisitler
KAR-CIDE F Aldehit Bazlı Bakterisit Bakteri Üreme Kontrolü KAR-CIDE F is an aldehyde based biocide used to control bacteria growth in water-base drilling, completion, workover and packer fluids.
KAR-CIDE F can be used in all types of water-base drilling fluids.
KAR-CIDE F is a highly active, broad spectrum biocide.
KAR-CIDE F in small concentrations effectively controls aerobic and anaerobic bacteria.
KAR-CIDE F is used for the prevention of slime and corrosion caused by sulfate reducing bacteria.
KAR-CIDE F also provides effective control on slime and corrosion caused by microorganisms in drilling, completion, workover and packer fluids.
KAR-CIDE T Triazine Bazlı Bakterisit Bakteri Üreme Kontrolü KAR-CIDE T is a triazine based biocide used to control bacteria growth in water-base drilling, completion, workover and packer fluids.
KAR-CIDE T is compatible with all water-base drilling fluids.
KAR-CIDE T is a highly active, broad spectrum biocide.
KAR-CIDE T is biodegradable and has low toxicity to marine life.
KAR-CIDE T in small concentrations effectively controls aerobic and anaerobic bacteria.
KAR-CIDE T is compatible with most oxygen and hydrogen suilfide scavengers.
KAR-CIDE T also provides effective control on slime and corrosion caused by microorganisms in drilling, completion, workover and packer fluids.
Korozyon Önleyiciler
KAR-SCAV OX Sodyum Bisülfit Oksijen Tutucu KAR-SCAV OX is a concentrated solution of sodium bisulphite used as an oxygen scavenger in water-base fluid systems.
KAR-SCAV OX removes dissolved oxygen in water-base systems which causes severe corrosion in the drill string and surface equipment at very low concentrations (<1 ppm) under most circumstances.
KAR-SCAV OX is compatible with all types of water-base drilling, workover and completion fluids except calcium and zinc brines
KAR-SCAV OX also extends the thermal stability of polymers commonly used in water-base drilling fluids.
KAR-SCAV HS Organik Tabanlı Hidrojen Sülfür (H2S) Tutucu KAR-SCAV HS is an organic based scavenger used to remove hydrogen sulphide (H2S) in all water-base drilling and completion fluids.
KAR-SCAV HS is not zinc or iron based H2S scavenger. It does not contain heavy metals.
KAR-SCAV HS reacts rapidly with hydrogen sulphide. This irreversible neutralization reaction prevents release of H2S when pH of the system drops in acidic range. This ensures a permanent removal.
KAR-SCAV HS is fully soluble in water and remains soluble  after  reacting  with  hydrogen sulphide. Hence, It provides solids free control.
KAR-SCAV HS performs over a wide range of pH levels even in acidic environment.
KAR-SCAV HS is compatible with all types of water-base drilling, workover and completion fluids.
KAR-SCAV HS has no adverse effect on drilling fluid rheology.
KAR-SCAV HS is environmentally acceptable.
KAR-ZINOX Çinko Oksit Hidrojen Sülfür (H2S) Tutucu KAR-ZINOX is a pure zinc oxide used as hydrogen sulphide (H2S) scavenger in all types of water-base fluids and particularly in oil-base drilling fluids.
KAR-ZINOX is a high surface area, fine zinc oxide compound utilized as a hydrogen sulphide scavenger in all types of drilling fluids, but especially recommended for use in oil-base fluids.
KAR-ZINOX consists of higher zinc more than 80% by weight compared to other sources of zinc, such as zinc carbonate, zinc sulfate or zinc chromate.
KAR-ZINOX is thermally stable up to temperatures of   204 °C (400 °F).
KAR-ZINOX functions well in a wide range of salinity.
Deflokülantlar
KAR-CFL Kromsuz Lignosülfonat Deflokülant Kar-Cfl is a chrome free lignosulfonate deflocculant used in a wide range of water-base drilling fluids
KAR-CFL is a superior deflocculant compatible with all water-base drilling fluids.
KAR-CFL is a superior deflocculant to control rheological properties. It is commonly used to prevent salt and calcium flocculation of bentonite as well as to minimize the high temperature gelation in bentonite fluids.
KAR-CFL also gives good secondary fluid loss control.
KAR-CFL functions over a wide range of pH levels but is most effective in the range of 9 to 11.
KAR-CFL is thermally stable at temperatures in excess of 300 °F.
KAR-CFL can tolerate common water base fluid contaminants and is compatible with common water-base fluid additives.
KAR-CFL is ideal for environmentally sensitive areas where use of chrome based additives not allowed.
KAR-THIN HT Sıvı Anyonik Akrilik Kopolimer Yüksek Sıcaklık Deflokülantı KAR-THIN HT is a liquid anionic acrylic copolymer used as high temperature deflocculant in a wide range of water-base drilling fluids.
KAR-THIN HT is an effective deflocculant in freshwater, seawater, sodium chloride and potassium chloride systems.
KAR-THIN HT works well in low solids, non dispersed polymer-base fluids.
KAR-THIN HT minimizes high temperature gelation in excess of 400 °F (204 °C).
KAR-THIN HT is not affected by calcium contamination or by high levels of salt.
KAR-THIN HT is not pH dependent and works over a wide pH range.
KAR-THIN HT also contributes to filtration control.
KAR-THIN HT is not subject to bacterial degradation and environmentally acceptable.
SAPP Sodyum Asit Pirofosfat Deflokülant KAR-SAPP is sodium acid pyrophosphate (Na2H2P2O7) used to treat cement contaminated water-base drilling fluids.
KAR-SAPP is an effective dispersant for bentonite-base fluids and is used to treat out calcium contamination, particularly that due to cement.
KAR-SAPP is used as a low cost, fast-acting dispersant in low-weight freshwater drilling fluids used in top-hole drilling.
KAR-SAPP is also effective in controlling free calcium in low pH muds.
KAR-SAPP is effective at low concentration levels.
Köpük Önleyiciler
KAR-DFM AS Alüminyum Sterat Köpük Önleyici KAR-DFM AS, Al(O2C18H35)3, is a powdered salt of aluminum hydroxide and stearic acid. It is used as defomer in all types of water-base drilling fluids.
KAR-DFM AS is used as an effective defoamer in all water-base drilling fluids.
KAR-DFM AS is effective at low concentrations and easy to mix.
KAR-DFM AS also prevents re-foaming.
KAR-DFM AS has no or little effect on drilling fluid rheology.
KAR-DFM SB Silikon Bazlı Köpük Önleyici Köpük Önleyici KAR-DFM SB is silicon based liquid defoamer used to prevent foaming in all types of water-base drilling fluids as well as solids free workover and completion fluids.
KAR-DFM SB is used as an effective defoamer in all water-base drilling fluids and solids free brine based systems.
KAR-DFM SB is effective at low concentrations and easy to mix.
KAR-DFM SB also prevents re–foaming.
KAR-DFM SB is thermally stable up to temperatures of   204 °C (400 °F).
KAR-DFM SB functions well over a wide range of pH. It is effective at high pH.
KAR-DFM SB is compatible with all types of drilling, workover and completion fluids.
KAR-DFM SB can be used in environmentally sensitive areas.
Sıvı Kaybı Düşürücüler
KAR-TROL Fermente Edilmemiş Modifiye Nişasta Sıvı Kaybı Kontrolü
KAR-LOSE BX Çapraz Bağlı Polimer Sıvı Kaybı Kontrolü & LSRV Kontrolü KAR-LOSE BX is an ester based cross-linked modified starch used as fluid loss control agent in water-base drilling and drill-in fluids utilizing the high low end rheology.
KAR-LOSE BX is cross-linked starch providing effective filtration control in PAY DRILL system.
KAR-LOSE BX works synergistically with KAR-ZAN DS to enhance low shear rate viscosity (LSRV) of PAY-DRILL system.
When KAR-LOSE BX is combined with a bridging agent such as sized calcium carbonate, PAY DRILL system provides a thin and flexible filter cake which can easily be removed with low breakout pressure. These characteristics of PAY DRILL system protect producing zone from damage by restricting fluid loss, fines migration and solids invasion.
KAR-LOSE BX is effective in all types of water-base drilling, drill-in, workover and completion fluids.
KAR-LOSE BX is non-ionic and thus has a good tolerance to monovalent and multivalent cations and is effective over a wide pH range.
KAR-LOSE BX is not subject to bacterial degradation.
KAR-TROL HT Sentetik Polimer Yüksek Sıcaklık Sıvı Kaybı Kontrolü & Viskozite Kontrolü
KAR- CMC LV Karboksimetil Selüloz (Düşük Viskoziteli) Sıvı Kaybı Kontrolü KAR-CMC LV is low viscosity sodium carboxymethyl cellulose used as primary fluid loss reducer in most water-base drilling fluids.
KAR-CMC LV reduces fluid loss in water-base drilling fluids with minimum effect on viscosity.
KAR-CMC LV is effective in all types of fresh water- base and seawater drilling fluids.
KAR-CMC LV also acts as deflocculant when used with seawater fluids in concentrations less than 0.25 lb/bbl.
KAR-CMC LV inhibits hydration and dispersion of water sensitive shales and hence contributes to borehole stability and performance of solids-control equipment.
KAR-CMC LV has a good tolerance to divalent ions and is effective over a wide pH range.
KAR-CMC LV is not subject to bacterial degradation.
KAR-PAC LV Polianyonik Selüloz (Düşük Viskoziteli) Sıvı Kaybı Kontrolü KAR-PAC LV is a premium grade low molecular weight polyanionic cellulose (PAC) used to control fluid loss in all types of water-base drilling fluids.
KAR-PAC LV imparts superior fluid loss control properties to the drilling fluids with minimum effect on viscosity.
KAR-PAC LV is effective in all types of water-base drilling fluids and is particularly useful in saturated salt systems.
KAR-PAC LV inhibits hydration and dispersion of water sensitive shales and hence contributes to borehole stability and performance of solids-control equipment.
KAR-PAC LV has a good tolerance to divalent ions and is effective over a wide pH range.
KAR-PAC LV is not susceptible to bacterial attack.
KAR-PAC LV systems are nontoxic and are especially suited for use in environmentally sensitive areas.
KAR-PAC SLVV Polianyonik Selüloz (Süper Düşük Viskoziteli) Sıvı Kaybı Kontrolü KAR-PAC SLV is a premium grade low molecular weight polyanionic cellulose (PAC) designed as super-low viscosifying fluid loss reducer for all water-base drilling fluids.
KAR-PAC SLV imparts superior fluid loss control properties to the drilling fluids with minimum effect on viscosity.
KAR-PAC SLV is effective in all types of water-base drilling fluids and is particularly useful in weighted systems.
KAR-PAC SLV inhibits hydration and dispersion of water sensitive shales and hence contributes to borehole stability and performance of solids-control equipment
KAR-PAC SLV has a good tolerance to divalent ions and is effective over a wide pH range.
KAR-PAC SLV is not susceptible to bacterial attack.
KAR-PAC SLV systems are nontoxic and are especially suited for use in environmentally sensitive areas
KAR-LOSE Sentetik Polimer Yüksek Sıcaklık Sıvı Kaybı Kontrolü & Viskozite Kontrolü
Kaçak Önleme
KAR-O-TROL G Gilsonit LCM, Şeyl Stabilizatörü KAR-O-TROL G is a high softening point gilsonite used as HTHP filtration control agent in conventional oil-base fluids.
KAR-O-TROL G provides HTHP filtration control in situations where high bottom hole temperatures exceeding 200 °C (392 °F) are anticipated.
KAR-O-TROL G improves filter cake quality.
KAR-O-TROL G is frequently utilized to seal low pressure and depleted formations.
KAR-O-TROL G also improves overall emulsion stability and suspending ability of the system.
CARB F, M, C, 1000 Kalsiyum Karbonat LCM Calcium carbonate ( CaCO3 ) is an acid soluable, bridging and weighting agent for drilling, work over and completion fluids. DDC Calcium Carbonate is available in three recomended grades. Fine , Medium and Coarse . Fine is used as a weighting material for drilling and work over fluids . Medium and Coarse grades are generally used for bridging or can be used for a weighting material with a larger particle size.
FIBROCEL XF, F, M, C Mikronize Selüloz Fiber LCM FIBROCEL is a lose-circulation material containing a blend of granular, flake, and fibrous materials available in three different grind sizes (Fine, Medium and Coarse Grade)
FIBROCEL, being a blend of various shape material, eliminates the need for having several different products on well location.
FIBROCEL, furnishes the advantages of a graded particle size with variation of types of materials. This mixture will penetrate fractures,vugs, and extremely porous zones
MICA F, M, C Mika LCM Mica is used to control lost circulation in water and oil base drilling fluids without any negative effects on drilling fluid properties.DDC Mica is available in three grades: Fine ( F ), Medium ( M ) and Coarse ( C ) .
The fine grade of micacan be circulated through a 20 mesh screen. Larger grades will be removed from the system unless the solids control equipment is by passed.
KAR-PLUG F, M, C Fındık Kabuğu LCM KAR-PLUG HN is selected hazelnut shells used for combating lost circulation.
KAR-PLUG HN is supplied in three grades: Fine, Medium and Coarse. The fine grade can be circulated, through 30 mesh shaker screen.
KAR-PLUG HN can be used both in water-base and oil base drilling fluids.
KAR-PLUG HN has minimal effect on drilling fluid properties.
KAR-PLUG HN is not subject to bacterial degradation.
Yağlayıcılar
KAR-LUBE EB Ester Bazlı Yağlayıcı Yağlayıcı KAR-LUBE EB is a highly effective and environmentally acceptable ester-base lubricant used in most water-base drilling fluids.
KAR-LUBE EB lowers torque and drag and prevents differential sticking by decreasing the coefficient of friction of most water-base drilling fluids in high angle, horizontal drilling situations.
KAR-LUBE EB is readily biodegradable, non-toxic and environmentally acceptable. This feature of KAR-LUBE EB makes it compatible for off-shore operations.
KAR-LUBE EB reduces the potential for bit and BHA balling and enhances penetration rate.
KAR-LUBE EB has no or minimal effect on rheological and filtration properties of drilling fluids.
KAR-LUBE EB is compatible with common water-base fluid additives.
KAR-LUBE EB EB is thermally stable at temperatures in excess of 300 °F.
KAR-SLIDE G Modifiye Edilmiş Grafit Yağlayıcı & Kuyu Stabilitesi
KAR-SLIDE HT Yüksek Sıcaklık Yağlayıcısı Yağlayıcı
KAR-LUBE L Modifiye Edilmiş Bitkisel Yağ Yağlayıcı KAR-LUBE is modified vegetable oil used as a lubricant in all water-base drilling fluids.
KAR-LUBE reduces torque and drag problems and prevents differential sticking by promoting the anti-friction characteristics of a drilling fluid in high angle, horizontal drilling situations
KAR-LUBE reduces the potential for bit and BHA balling.
KAR-LUBE contributes significantly to HTHP fluid loss control.
KAR-LUBE has no or minimal effect on rheological properties of drilling fluids.
KAR-LUBE is not sensitive to calcium, cement and carbonate contamination and compatible with common water-base fluid additives.
KAR-LUBE is thermally stable at temperatures in excess of  250 °F.
KAR-LUBE works over a wide range of pH levels and poses low foaming potential.
KAR-LUBE is biodegradable, non-toxic and non-polluting.
Tuzlar
AMONYUM KLORÜR Amonyum Klorür Yoğunluk Kontrolü AMMONIUM CHLORIDE (NH4Cl) is a white inorganic crystalline salt of 98% purity.
AMMONIUM CHLORIDE is used to prepare solids free workover and completion fluids with densities up to 8.9 lb/gal.
AMMONIUM CHLORIDE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
AMMONIUM CHLORIDE brines eliminate the risk of scale formation when either the produced gas or formation waters are rich in carbonate and sulfate ions.
AMMONIUM CHLORIDE brines prevent the formation of insoluble fluorosilicates in sandstone acidizing with mud acid.
An endothermic reaction takes place when AMMONIUM CHLORIDE is added to water. This results in a decrease in brine temperature.
KALSİYUM BROMİT Kalsiyum Bromit (toz, 95% min.) Yoğunluk Kontrolü Calcium Bromide (CaBr2) is a white powdered inorganic salt of 95% purity.
CALCIUM BROMIDE is used to prepare solids free workover and completion fluids with densities up to 15.2 lb/gal. It can also be used for packer fluids.
CALCIUM BROMIDE is also used to increase the density of various calcium chloride/calcium bromide/zinc bromide blends.
CALCIUM BROMIDE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
An exothermic reaction takes place when CALCIUM BROMIDE is added to water. This results in an increase in brine temperature.
KALSİYUM BROMİT L Kalsiyum Bromit (sıvı 15.4 ppg) Yoğunluk Kontrolü CALCIUM BROMIDE L (CaBr2) is a 52% calcium bromide solution.
CALCIUM BROMIDE L is used to prepare solids free workover and completion fluids with densities up to 15.2 lb/gal. It can also be used for packer fluids.
CALCIUM BROMIDE L is also used to increase the density of various calcium chloride / calcium bromide / zinc bromide blends.
CALCIUM BROMIDE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
KALSİYUM KLORÜR Kalsiyum Klorür (toz, 95% min.) Yoğunluk Kontrolü CALCIUM CHLORIDE (CaCl2) is a white inorganic salt of 94-97% purity available in various forms.
CALCIUM CHLORIDE is used to prepare solids free workover and completion fluids with densities up to 11.6 lb/gal.
CALCIUM CHLORIDE is also used to increase the density of various calcium chloride/calcium bromide/zinc bromide blends.
CALCIUM CHLORIDE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
CALCIUM CHLORIDE is utilized to adjust the activity of the water phase in invert emulsion systems.
An exothermic reaction takes place when CALCIUM CHLORIDE is added to water. This results in an increase in brine temperature.
KALSİYUM KLORÜR T Kalsyium Klorür (toz, 78-80% ) Yoğunluk Kontrolü CALCIUM CHLORIDE T (CaCl2) is a white inorganic salt of 77-80% purity available in various forms.
CALCIUM CHLORIDE T is used to prepare solids free workover and completion fluids with densities up to 11.6 lb/gal.
CALCIUM CHLORIDE T is also used to increase the density of various calcium chloride/calcium bromide/zinc bromide blends.
CALCIUM CHLORIDE T brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
CALCIUM CHLORIDE T is utilized to adjust the activity of the water phase in invert emulsion systems.
An exothermic reaction takes place when CALCIUM CHLORIDE T is added to water. This results in an increase in brine temperature.
POTASYUM KARBONAT Potasyum Karbonat (95-99%) Şeyl Stabilizatörü & Yoğunluk kontrolü
POTASYUM KLORÜR Potasyum Klorür (95-99%) Şeyl Stabilizatörü & Yoğunluk kontrolü POTASSIUM CHLORIDE (KCl) is a white inorganic powdered salt of 99% purity.
POTASSIUM CHLORIDE is used to prepare solids free workover and completion fluids with densities up to 9.7 lb/gal.
POTASSIUM CHLORIDE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
POTASSIUM CHLORIDE is used as economical source of potassium for inhibitive water-base drilling and completion fluids.
POTASSIUM CHLORIDE brines eliminate the risk of scale formation when either the produced gas or formation waters are rich in carbonate and sulfate ions.
SODYUM KLORÜR Sodyum Klorür Yoğunluk Kontrolü SODIUM CHLORIDE (NaCl) is a white inorganic powdered salt of 99% purity.
SODIUM CHLORIDE is used to prepare solids free workover and completion fluids with densities up to 10 lb/gal.
SODIUM CHLORIDE is also used to formulate saturated salt water fluids in either salt dome or salt bed drillings.
SODIUM CHLORIDE is an effective inhibitor for preventing the gas hydrate formation particularly in off-shore drilling operations.
SODIUM CHLORIDE can be utilized to adjust the activity of water phase of invert emulsion systems.
SODIUM CHLORIDE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
SODIUM CHLORIDE brines eliminate the risk of scale formation when either the produced gas or formation waters are rich in carbonate and sulfate ions.
SODYUM FORMİYAT Sodyum Formiyat (97%) Yoğunluk Kontrolü SODIUM FORMATE (NaCOOH) is a white free flowing crystalline organic salt of 97% purity.
SODIUM FORMATE is used to prepare solids free workover and completion fluids with densities up to 11.0 lb/gal.
SODIUM FORMATE brines contribute to formation damage control by stabilizing the water sensitive clays during workover and completion operations.
SODIUM FORMATE brines eliminate the risk of scale formation when either the produced gas or formation waters are rich in carbonate and sulfate ions.
Formate-base brines have better HSE characteristics than chloride and bromide brines.
Takım Kurtarma Sıvıları
KAR-SPOT Ağırlaştırılmamış Takım Kurtarma KAR-SPOT  is a unique blend of an emulsifier, a surfactant and an organophilic clay which is designed for preparing oil-base spotting fluids to free differentially stuck pipe.
KAR-SPOT  is mixed with oil and water an oil-base spotting fluid to free differentially stuck pipe. Oil phase of spotting fluid is made up of crude oil, diesel oil, mineral oil or KAR-LUBE. Freshwater, seawater or brine constitute water portion. Once formulated the fluid is placed in stuck zone. KAR-SPOT  breaks down filter cake and allows the spotting fluid to penetrate between the drill string and formation while wetting and lubricating the drill string. This dual effect of spotting fluid reduces the force necessary to free stuck pipe.
KAR-SPOT  imparts excellent rheological properties to keep weight material in suspension without the need for any other material.
The oil to water ratio of spotting fluid varies depending on fluid density. It increases with increasing fluid density.
KAR-SPOT  can tolerate the contamination by water-base drilling fluid.
KAR-SPOT  can also be used to formulate spacer fluid for cementing when oil-base drilling fluid is used.
KAR-SPOT W Ağırlaştırılmış Takım Kurtarma KAR-SPOT W is a unique blend of an emulsifier, a surfactant and an organophilic clay which is designed for preparing oil-base spotting fluids to free differentially stuck pipe.
KAR-SPOT W is mixed with oil, water and weight material to prepare a weighted oil-base spotting fluid to free differentially stuck pipe. Oil phase of spotting fluid is made up of crude oil, diesel oil, mineral oil or KAR-LUBE. Freshwater, seawater or brine constitute water portion. Once formulated the fluid is placed in stuck zone. KAR-SPOT W breaks down filter cake and allows the spotting fluid to penetrate between the drill string and formation while wetting and lubricating the drill string. This dual effect of spotting fluid reduces the force necessary to free stuck pipe.
KAR-SPOT W imparts excellent rheological properties to keep weight material in suspension without the need for any other material.
KAR-SPOT W can also be used in un-weighted formulations.
The oil to water ratio of spotting fluid varies depending on fluid density. It increases with increasing fluid density.
KAR-SPOT W can tolerate the contamination by water-base drilling fluid.
KAR-SPOT W can also be used to formulate spacer fluid for cementing when oil-base drilling fluid is used.
Yüzey Aktif Maddeler ve Köpük Yapıcılar
KAR-ANTI BALL iyonik ve İyonik Olmayan Yüzey Aktif Madde Karışımı BHA & Bit Yumaklama Önleyici KAR-ANTI BALL is a special blend of environmentally acceptable ionic and nonionic surfactants. It is used to prevent bit and bottom-hole assembly balling in all water-base drilling fluid systems.
KAR-ANTI BALL prevents sticky drilled cuttings from “balling up” the bit and bottom hole assembly.
KAR-ANTI BALL is compatible with all types of water-base drilling fluids.
KAR-ANTI BALL reduces torque and drag and the risk of hole packoff.
KAR-ANTI BALL also acts as penetration rate enhancer in water-base drilling fluids.
KAR-ANTI BALL contributes to fluid loss control.
KAR-ANTI BALL does not have adverse effect on rheological properties of drilling fluids.
KAR-ANTI BALL works over a wide range of pH levels and poses low foaming potential.
KAR-ANTI BALL improves performance of solids control equipment.
KAR-ANTI BALL is non-toxic and non-polluting. Thus it is ideal for all onshore and offshore operations.
KAR-AQUA WET Alkil Eter Sülfat ve Glikol Karışımı Köpük Ajanı Kar-Aqua Wet is a proprietary blend of liquid surfactants designed for use in well clean up operations.
KAR-AQUA WET is used to remove oil-base drilling fluid residue from wellbore surfaces.
KAR-AQUA WET is a powerful water wetting agent that leaves all downhole tubulars in water wet.
KAR-AQUA WET promotes the suspension of drilling fluid solids and other deposits contributing to formation damage.
KAR-AQUA WET with pH of 6 to 8 doesn’t have any adverse effect on cement or acid sensitive formations.
KAR-AQUA WET is extremely effective oil emulsifier.
KAR-AQUA WET is effective at low concentrations.
KAR-AQUA WET is an effective blend of non-ionic surfactants that are non-alkaline and environmentally friendly.
KAR-AQUA WET works in freshwater-base and seawater- base fluid systems.
KAR-AQUA WET is effective over a wide range of temperature.
Vizkozite Yapıcılar
KAR-BEN İşlem Görmüş Bentonit Vizkozite Yapıcı, Sıvı Kaybı Kontrolü KAR-BEN is a premium grade sodium bentonite used as viscosifier and fluid loss reducer in most water-base drilling fluids. It meets API 13A Section 9 specifications
KAR-BEN is used as a primary filter cake building filtration control and suspension agent in fresh water systems and has application in most water-base fluid systems.
KAR-BEN provides thin, impermeable and compressible filter cake in the wellbore.
KAR-BEN is a cost effective product for achieving viscosity
KAR-BEN NT İşlem Görmemiş Bentonit Vizkozite Yapıcı, Sıvı Kaybı Kontrolü KAR-BEN NT is a premium grade non-treated bentonite used as viscosifier and fluid loss reducer in most water-base drilling fluids. It meets API 13A Section 10 specifications
KAR-BEN is used as a primary filter cake building filtration control and suspension agent in fresh water systems and has application in most water-base fluid systems.
KAR-BEN provides thin, impermeable and compressible filter cake in the wellbore.
KAR-BEN is a cost effective product for achieving viscosity
KAR-THERMA GEL Sepiyolit Vizkozite Yapıcı KAR-THERMA GEL is a premium grade sepiolite clay used as high temperature viscosifier in all types of water-base drilling fluids.
KAR-THERMA GEL is used to increase viscosity in all types of water-base drilling fluids, particularly salt water and high temperature drilling fluids.
KAR-THERMA GEL is thermally stable with no gelation at temperatures of more than 500 °F. This feature of KAR-THERMA GEL makes it suitable for high-temperature applications such as geothermal drilling fluids.
KAR-THERMA GEL is not a swelling type clay mineral. It produces viscosity by the physical interaction of its rod-like particles.
KAR-THERMA GEL can be utilized to formulate high viscosity sweep fluids
KAR-HEC Hidroksietil Selüloz Vizkozite Yapıcı, Sıvı Kaybı Kontrolü Kar-Hec is a nonionic hydroxyethylcellulose polymer used as viscosifier for fresh water and various brine based workover and completion fluids.
KAR-HEC is a highly effective viscosifier for sodium chloride, potassium chloride, calcium chloride, sodium bromide and potassium bromide brines. It performs well at any salt concentration up to saturation point.
KAR-HEC produces shear-thinning and non-thixotrophic fluids with high apparent viscosity, high yield points, and low fragile gel strengths.
KAR-HEC has excellent tolerance to divalent ions and is effective over a wide pH range.
KAR-HEC is completely water soluble and hydrates rapidly in fresh water and brine fluids without “fisheyes”.
KAR-HEC is readily breakable by hydrochloric acid, oxidizing agents and enzymes.
Because of its exceptional solubility and degradation features, KAR-HEC is regarded as being non-damaging polymer for clear brine applications.
KAR-HEC is not susceptible to bacterial attack and hence no biocide is needed.
KAR-HEC is nontoxic and environmentally compatible.
KAR-VIS G Guar Sakızı Vizkozite Yapıcı A premium grade, high viscosity, fine-grind Guar Gum for use in foods and feeds where superior whiteness, fast hydration and high viscosity are desired.
Exhibits high viscosity at low concentrations in water. Non-Newtonian, pseudo-plastic (shear thinning) rheology. Viscosities increase exponentially with increasing concentrations in water.
KAR-CMC HV Karboksimetil Selüloz (Yüksek Viskozite) Vizkozite Yapıcı, Sıvı Kaybı Kontrolü KAR-CMC HV is high viscosity sodium carboxy-methyl cellulose used as viscosifier in addition to fluid loss control in water-base drilling fluids.
KAR-CMC HV reduces fluid loss while increasing viscosity in freshwater and seawater-base drilling fluids
KAR-CMC HV is effective in all types of fresh water- base and seawater drilling fluids.
KAR-CMC HV also acts as deflocculant when used with seawater fluids in concentrations less than 0.25 lb/bbl.
KAR-CMC HV inhibits hydration and dispersion of water sensitive shales and hence contributes to borehole stability and performance of solids-control equipment.
KAR-CMC HV has a good tolerance to divalent ions and is effective over a wide pH range.
KAR-CMC HV is not subject to bacterial degradation.
KAR-PAC R Polianiyonik Selüloz (Yüksek Viskozite) Vizkozite Yapıcı, Sıvı Kaybı Kontrolü KAR-PAC R is a premium grade, high molecular weight polyanionic cellulose (PAC) used to control fluid loss and viscosity in all types of water-base drilling fluids
KAR-PAC R is used as both viscosifier and fluid loss control agent in all types of water-base drilling fluids. It is particularly useful in saturated salt systems.
KAR-PAC R inhibits hydration and dispersion of water sensitive shales and hence contributes to borehole stability.
KAR-PAC R has a good tolerance to divalent ions and is effective over a wide pH range.
KAR-PAC R improves the performance of solids-control equipment reducing the dispersion of drill cuttings.
KAR-PAC R is not susceptible to bacterial attack.
KAR-PAC R systems are nontoxic and are especially suited for use in environmentally sensitive areas.
KAR -ZAN D Ksantan Sakızı Vizkozite Yapıcı KAR-ZAN D is an easily dispersible, high molecular weight biopolymer (xanthan gum) used as viscosifier in water-base fluid systems.
KAR-ZAN D produces highly shear-thinning and thixotrophic fluids with excellent hole cleaning and suspension capacity.
KAR-ZAN D is effective in all types of fresh and sea water-base drilling fluids as well saturated monovalent salt systems.
KAR-ZAN D is effective over a wide pH range and also provides some degree of fluid loss control.
KAR-ZAN D causes minimum formation damage and is completely removed by acids and oxidizing agents.
KAR-ZAN D disperses easily in fresh water or brine with minimum risk of “Fish eyes” and lumping.
Ağırlaştırma Katkıları
CARB F, M, C Kalsiyum Karbonat Ağırlaştırıcı Calcium carbonate ( CaCO3 ) is an acid soluable, bridging and weighting agent for drilling, work over and completion fluids. Calcium Carbonate is available in three recomended grades. Fine , Medium and Coarse . Fine is used as a weighting material for drilling and work over fluids . Medium and Coarse grades are generally used for bridging or can be used for a weighting material with a larger particle size.
KAR-FERODENS Hematit Ağırlaştırıcı KAR-FERODENS is high quality, ground hematite (Fe2O3) used as a weighting agent to increase the density in all types of drilling fluids. It meets API 13A Section 3 specifications for drilling hematite.
KAR-FERODENS can be utilized to increase drilling fluid density up to 26 lb/gal.
KAR-FERODENS has a specific gravity of 5.0, which is 19% greater than the density of Barite (4.2). Thus, for a given density, it is possible to weight a system with low solids content by volume using KAR-FERODENS instead of barite. Lower solids content contributes to improved rheological properties as well as to increased penetration rate.
KAR-FERODENS also contributes to wellbore stability and formation pressure control.
KAR-FERODENS is compatible with most fluid additives.
KAR-FERODENS is soluble in hydrochloric acid (HCl) acid.
KAR-FERODENS acts as a secondary hydrogen sulfide (H2S) scavenger which partially removes H2S at neutral and low pH levels.
KAR-FERODENS is a cost effective weighting agent.
KAR-BAR Barit Ağırlaştırıcı KAR-BAR is finely ground high quality barite (BaSO4) used as a weighting agent to increase the density in all types of drilling fluids. It meets API 13A Section 2 specifications for drilling barite.
KAR-BAR can be utilized to increase drilling fluid density up to 21 lb/gal.
KAR-BAR also contributes to wellbore stability and formation pressure control.
KAR-BAR is chemically inert and insoluble.
KAR-BAR is compatible with common fluid additives.
KAR-BAR is a cost effective weighting agent.
KAR-BAR is thermally stable at temperatures up to 177 °C (350 °F).
Kuyu Stabilitesi Kontrolü
KAR-GUARD Katoyonik PHPA Şeyl Kaplama KAR-GUARD is a low molecular weight, highly cationic liquid polyamine designed to stabilize water sensitive shale formations
KAR-GUARD offers an inhibition mechanism which involves a neutral amine molecular binding to the clay via metal cations.
KAR-GUARD is compatible with fresh water, seawater, saltwater, lime and low solids systems.
KAR-GUARD significantly reduces dispersion and hydration of the highly reactive and dispersive shale formations. Consequently, KAR-GUARD minimizes the incidence of tight hole and washouts.
KAR-GUARD reduces the potential for bit and BHA balling.
KAR-GUARD lowers fluid loss in most water-base drilling fluids.
KAR-GUARD is not sensitive to calcium, cement and carbonate contaminations.
KAR-GUARD is thermally stable at temperatures in excess of 300 °F.
KAR-PHPA L Anyonik PHPA (Sıvı) Şeyl Kaplama KAR-PHPA L is a pure liquid high molecular weight partially hydrolyzed polyacrylamide.
KAR-PHPA L improves wellbore stability by inhibiting the hydratable and dispersible shales.
KAR-PHPA L reduces the disintegration of cuttings through polymer encapsulation and hence leading to effective solids control.
KAR-PHPA L provides excellent hole-cleaning due to the shear thinning rheology imparted to the drilling fluid.
KAR-PHPA L also aids in reducing drag and enhancing rate of penetration.
KAR-PHPA L provides some fluid loss control and improves filter cake quality.
KAR-PHPA L minimizes bit and stabilizer balling.
KAR-PHPA L minimizes the incidence of tight hole and washouts.
KAR-PHPA RD Anyonik PHPA (Toz) Şeyl Kaplama KAR-PHPA RD is a pure powdered high molecular weight partially hydrolyzed polyacrylamide.
KAR-PHPA RD improves wellbore stability by inhibiting the hydratable and dispersible shales.
KAR-PHPA RD reduces the disintegration of cuttings through polymer encapsulation and hence leading to effective solids control.
KAR-PHPA RD provides excellent hole-cleaning due to the shear thinning rheology imparted to the drilling fluid.
KAR-PHPA RD also aids in reducing drag and enhancing rate of penetration.
KAR-PHPA RD provides some fluid loss control and improves filter cake quality.
KAR-PHPA RD minimizes bit and stabilizer balling.
KAR-PHPA RD minimizes the incidence of tight hole and washouts.
KAR-GLY LC Polialkilen Glikol (Düşük Bulutlanma Noktası) Şeyl Stabilizatör KAR-GLY LC is low-cloud-point polyalkylene glycol formulation. It is used in water-based drilling fluids to improve lubricity and shale stability. It is recommended for use in potassium and sodium based salt (5-22 percent by weight).
KAR-GLY LC is particularly effective with common salinity’s type and ranges used in the drilling fluid industry.
KAR-GLY MC Polialkilen Glikol (Orta Bulutlanma Noktası) Şeyl Stabilizatör KAR-GLY MC is medium-cloud-point polyakylene glycol formulation.
KAR-GLY MC is used in water-based drilling fluids to improve lubricity and shale stability. It is recommended for use in potassium-based and sodium-based salt (2-15 percent by weight).
KAR-GLY MC stabilizes reactive formations, increase lubricity of the drilling fluid, reduce bit-balling tendencies and decrease HTHP filtration.
KAR-GLY  HC Polialkilen Glikol (Yüksek Bulutlanma Noktası) Şeyl Stabilizatör KAR-GLY  HC is cloud-point additive for high salinity fluids, range salinity (greater than 90,000 mg/l Cl-) and can be used in wells with moderate formation temperature.It is designed for high- to saturated-salinity GLYDRIL systems and can be used in wells with moderate to high formation temperatures. It is used in water-based drilling fluids to improve lubricity and shale stability.
KAR-GLY  HC stabilizes reactive formations, increase lubricity of the drilling fluid, reduce bit-balling tendencies and decrease HTHP filtration.
KAR-TROL K Sülfonize Edilmiş Potasyum Asfalt Şeyl Stabilizatör KAR-TROL K is a potassium salt of sulfonated asphalt designed as shale inhibitor and high temperature fluid loss control additive.
KAR-TROL K forms a though asphaltic film on the water sensitive shales and cuttings which stops their hydration and dispersion.
KAR-TROL K stabilizes the brittle shales physically by blocking micro fractures and pores in the brittle shales.
KAR-TROL K provides additional shale hydration inhibition by contributing water soluble potassium ion to the drilling fluid.
KAR-TROL K reduces torque and drag as a result of the lubricating film formed on the well bore.
KAR-TROL K provides excellent high temperature/high pressure fluid loss control and improves filter cake quality.
KAR-TROL K assists to emulsify oil in water-base drilling fluids.
KAR-STAB N Sülfonize Edilmiş Sodyum Asfalt Şeyl Stabilizatör
KAR-SEAL G Gilsonit (Toz) Şeyl Stabilizatör & LCM KAR-SEAL G is a water dispersible gilsonite primarily designed to stabilize mechanically weak or fractured shales when used in water-base drilling fluids.
KAR-SEAL G stabilizes brittle, fractured or steeply dipping shales by plugging the micro fractures or bedding planes and hence restricting the filtrate invasion.
KAR-SEAL G is an effective HTHP fluid loss control agent providing high quality, thin, compressible and slippery filter cake.
KAR-SEAL G also reduces torque and drag forming hard, thin and slippery filter cake on wall of the hole.
KAR-SEAL G reduces the potential for bit and BHA balling.
KAR-SEAL G performs equally in salt and calcium contaminated drilling fluids.
KAR-SEAL G is compatible with all types of water-base and oil-base drilling fluids.
KAR-SEAL G minimizes potential differential sticking in depleted sands.
KAR-SEAL G is not sensitive to calcium, cement and carbonate contamination.
KAR-SEAL G is thermally stable at temperatures in excess of 350 °F even in high pH systems.
KAR-SEAL G works at all pH levels.
FLOTASYON KİMYASALLARI
Potasyum Amil Ksantat – PAX (KAX)
Potasyum Etil Ksantat – PEX (KEX)
Sodyum İzopropil Ksantat – SIPX
Sodyum İzobutil Ksantat – SIBX
Sodyum Sülfür (Zırnık)
Sodyum Sülfidrat
Metil İzobütil Karbinol – MIBC
2 – Etil Hekzanol
Butil Glikol
Bakır Sülfat
Çinko Sülfat
Sodyum Bikromat
Sodyum Silikat
DİĞER KİMYASALLAR
Alüminyum Sülfat
Demir(III)Klorür
Sodyum Hidroksit
Hidroklorik Asit
Sülfürik Asit
Fosforik Asit
Sodyum Metabisülfit
Polialüminyum Klorür
Sodyum silikat
Antiskalant
Metalsorb (Ağır Metal Giderimi)
Flokülantlar
Aktif Karbon
Dağıtıcılar, deprasantlar